The K&F rotation clamp creates a robust and safe connection between the load adapter of a suitable K&F flying frame and a standard truss or similar pipe system. It allows you to freely rotate the suspended speakers and to lock them in the desired position using a clamping lever.

Note that the half couplers of the K&F rotation clamp 450 are not interchangeable.

This clmap will fit structures made of trusses or pipes with a diameter of 60mm can be used.

In compliance with the German DGUV regulations 17 and 18 (formerly BGV C1), the K&F rotation clamp is capable of carrying a total load of 450 kg (speaker including flying frame and all further loads such as cabling, load adapters, etc.).

The K&F rotation clamp can be used with the following products:

• K&F VIDA L flying frame

• K&F SEQUNEZA 5 flying frame

• K&F SEQUENZA 10 flying frame 

Includes global truss half coupler (black, item # 823 for diameters of 60 mm) and M10 x 35 screw. Strength class 12.9, SWL 450 kg (as per DGUV regulations 17 and 18 (BGV C1)) 

The K&F rotation clamp 450 is designed for suspending KLING & FREITAG speakers indoors with no wind loads.

Always be sure to use the supplied couplers and screws only.

The rotation clamp 450 is suitable for use with K&F VIDA L flying frames, K&F SEQUENZA 5 flying frames and K&F SEQUENZA 10 flying frames.

Setup involves mounting a flying frame including their load adapters between the speaker and the rotation clamp.

The admitted load of 450 kg (as per DGUV V17 and V18 or BGV C1) must not be exceeded. Vertical lifting of loads only.